news

Recent Projects

Keep away from Using Misunderstanding, It’s not hard to use Air Source Water Heaters

In recent years, with the implementation of China coal-to-electricity policy, swimming pool heat pump manufacturers have gradually entered the field of vision. However, in the use of air source water heaters, many people have such misunderstandings.

1. Noisy

Surveys have shown that many people believe that air source water heaters have compressors and that the compressors are noisy at work and can affect daily life. However, this is not the case.

First, let's find out the source of noise for air source water heaters. There are two sources of noise: First, the noise generated by the fan components in the water heater; Second, the improper installation of the body, not to do a good job of shockproof work, resulting in internal pipelines and The shell produces a collision and generates noise.

However, this phenomenon is already a thing of the past. At present, the air source heat pump industry is no longer the same as before, and the problem of noise has long been solved by various air energy companies. Today's water heaters are mostly equipped with dual-turbo large fan configurations, and use lower speeds to achieve the effect of small fans. We all know that the lower the fan speed, the lower the noise, and the appropriate sound insulation measures, can effectively reduce equipment The sound at work makes the sound as low as 50db.


2. Difficult to use due to complex operation

Many people say that most of the air-to-water heaters are for parents to buy. They worry that the operation is too complicated and parents will not use it. In fact, it is not necessary to worry about it. With advancements in technology, water heaters are also being upgraded. As the fourth-generation water heater, air-to-water heaters will only be better and harder to use. At present, most air energy heaters use a "one-click setting" design. The water heater has a control panel and only needs to set the heating temperature of the water heater through a remote controller or a touch screen. The water heater will automatically absorb the heat in the air to make hot water. The high degree of automation, even for the elderly is also easy to operate.

3. Long time for heating

Some people think that the air source water heater tank is large and it takes a long time to heat a bucket of water. In fact, this is also a misunderstanding of people's thinking.

Electric water heaters are the second generation of water heaters, and air source water heaters are the fourth generation of water heaters. The two are not the same. Although they are all water storage water heaters, the capacity of electric water heaters is generally not 100 L. Adults need about 50L of hot water to complete a bath, so electric heaters need to be heated repeatedly. Air-energy water heaters are different. The capacity of most product water tanks can reach 150 or even 200L, which is much higher than that of electric water heaters. Coupled with the improvement of air-heating technology, the heating time of the equipment has been greatly shortened and once heated, the bathing of the whole family is no longer a dream.


The rapid development of science and technology, a new generation of products is always based on the improvement of old products, hope that more people can know more about air source heat pump water heater products through this article.


Read More

Leave A Comment

Prev Next